New 1.5" Bump Stop Pucks up front for the 37"s...

I installed the 1.5" Bump Stop Pucks up front for the 37"s... I had them on before the body lift, but took them back off.
I also did some fender bashing with a hammer to make room for these huge tires.

Above is before hammer.

Below is after.

I need to trim a bit more.

Tires 35" vs. 37" on same 80 series

Hey there, just posting up some pics to compare what 37s look like compared to 35s/315s on my Cruiser. Same lift etc...

Test Flex Fitting new 37" ST Maxx tires on 4runner wheels with the Lx450 Cruiser

I had a little bit of time to streach her legs out yesterday in the creek bed. I went to my favorite spots as usual.
All I have to say is if it doesn't rub then it's about .25" away from doing so, EVERYWHERE! These pics are with the sway bar on, it does flex much better with it off. Way better. At this point I dare not disco the sway until I cut the front fenders or better said, gut the insides of my front fenders. Yes, I will retain the front flares & clading. Only one other rig I've seen has done this.
Here are some poser shots.

Can you say one stuffed 37?

The side wall tread is completely in there.

My right rear (RR) only rubs the top of the fender.

The left rear (LR) is a different story... it rubs in three spots.

The fronts will need bump stops pucks or some inner fender gutting... I'm definitely going to eventually  cut & here is how.

The Cruiser got new shoes...

The Cruiser got new shoes today.
A set of 37" Cooper ST Maxx tires. The 315s finally where sold.

Got 37s?
I just did!
Finally, three sets of tires later in 1.5 years...
I really didn't think they would fit without major modification, so I went 315s.
Since I did a lot of reading on IH8MUD.com and found that it was very possible. A shout goes out to all the people who did it before me & documented it here on IH8MUD. I went with the Arizona Boys method of fitment. Special thanks goes out to @Tools R Us & @richardlillard1 .
I choose to go with a 4.9"/125mm back space 4Runner wheel & 1" spacers. They do come very close to everything with some very slight rubbing. With some small tweaks I should be able to flex it out worry free.
I have 2.5" suspension lift with a 1" body lift.
Basically a 3.5" lift. Cooper ST MAXX tires spec out to be a tad taller than the STT Pro.
More info coming... let's go wheelin.

The lugs are more spread on the 37s compaired the the 315s.

The 3.9" back spacing worked out really well. I was shooting for a 3.75" BS...